Friday, August 30, 2013

Naptime Project–Hanging Cup Holder

I have a Jeep jogging stroller that I love. It’s made walking Finn to and from school with Beckett much more pleasant. I especially love that I found it at Thrift Town for $30. Yay!

There’s only one downside to it:

IMG_4321

Too small cup holders.

Sure, it has a generously sized basket under the seat, but sometimes water bottles get leaky, and carrying anything that isn’t 100% spill proof is out of the question. Thanks to this tutorial from Sew Can Do, I was able to remedy this problem during Beckett’s nap.

I did make a few changes. Rather than using laminated cotton, mostly because I don’t have any, I used some old jeans. (Yay for upcycling!)

IMG_4326

My straw cup is bigger than most water bottles, so I made the pocket a little bigger. If you’re needing to do the same, trace a circle about .5 inches bigger than your cup. To figure out the long side of your rectangles, use the formula 2 x 3.14 x r to find the circumference. (If you’ve slept since geometry class, r is the radius or half the distance across your circle.)

IMG_4328

I also replaced the snaps with Velcro. I had both on hand, but the thought of setting snaps through two layers of denim was not appealing. I have enough trouble setting snaps through thin fabrics. Besides, I figured it’s easier to rip out stitches if the Velcro doesn’t hold than it is to pry out the snaps if they don’t work out.

I’ll get to try it out this afternoon, but so far it looks good. If it doesn’t work out on the stroller, it does fit on my elliptical machine that also needs a cup holder. Smile

IMG_4322